Free tracked shipping on orders over €49 to EU countries and the UK

Shilajit explained

How to Read a Shilajit Lab Report for Heavy Metals

How to read a shilajit lab test for heavy metals: who issues it, units, LOQ, EU limits, turning mg/kg into a daily serving, and the red flags to watch for.

By Andrius, founder of Hilasti · Reviewed 16 November 2026 · 12 min read

A small piece of dark raw shilajit resin in a glass petri dish on a dark lab bench, beside a test tube of amber-brown solution in a metal rack and a glass pipette, in warm side light

A shilajit lab report tells you how much lead, cadmium, mercury and arsenic an independent laboratory found in one batch of resin, usually in milligrams per kilogram. To read it, check who tested it and which batch, then compare each figure with the EU maximum levels for food supplements and work out what it means for your daily serving.

It looks technical, but there are only a handful of things to find on the page. This guide walks through each one, with a real report as the example. If you’re after kitchen tests or warning signs in a seller, our guide on how to tell if shilajit is real covers those.

What is a shilajit certificate of analysis?

A certificate of analysis, often shortened to CoA, is a laboratory’s written record of what it found in a sample. For shilajit, the heart of it is a short table of metals with a number beside each one. Many labs call the same document a test report or a protocol.

Who wrote it matters as much as what it says. An in-house report comes from the seller’s own lab or quality team. A third-party report comes from an independent laboratory that has nothing to gain from a good result. Both can be accurate, but only the second lets you trust the numbers without trusting the seller.

The report also applies to one thing: the sample the lab received. Shilajit is a natural resin, and each harvest is a little different, so a result speaks for its batch rather than the brand.

What does ISO/IEC 17025 accreditation mean?

ISO/IEC 17025 is the international standard for testing and calibration laboratories. It sets out what a lab needs to show that its staff are technically competent and that it has the resources to produce consistently accurate, reliable results 1. Accreditation is the formal recognition, by an authoritative body, that an organisation is competent to carry out specific tasks 1.

Laboratories are assessed by national accreditation bodies, such as UKAS in the UK. The assessors look at things like staff competence, test methods, equipment and quality checks on the data 1. Accreditation bodies that sign international arrangements, such as the EA agreement in Europe and the ILAC arrangement worldwide, accept each other’s accredited reports as technically equivalent 1 2.

One detail is easy to miss. A lab is only accredited for the activities listed on its schedule, or scope 1. A lab accredited for water testing isn’t automatically accredited for metals in food, so the accreditation number on a report is worth looking up.

What’s on a shilajit lab report?

Most reports follow the same pattern, whichever lab wrote them. Here’s what each part tells you.

Part of the report What it tells you What to look for
Lab name and accreditation Who did the test A named lab with an accreditation number
Report number and date Which document this is, and when Both printed on every page
Batch or sample ID What was tested A batch number you can match to a jar
Method How each metal was measured A named technique, such as ICP-MS
Results and units How much was found A number and a unit for every metal
LOQ or LOD The smallest amount the method can see Well below the EU limit
Uncertainty How precise each result is Shown as ± after the result

Method: what is ICP-MS?

ICP-MS stands for inductively coupled plasma mass spectrometry. The sample is dissolved in acid, then fed into a plasma so hot that it splits everything into atoms, and the instrument counts each element by its mass. It can measure many metals in one run at very low levels. A 2026 study of 12 shilajit samples used it to measure lead, cadmium and mercury alongside minerals such as calcium and iron 3.

Mercury is sometimes measured with a separate instrument, a direct mercury analyser. In one study of Ayurvedic supplements, including shilajit, the two methods gave similar results 4.

LOD, LOQ and “<LOQ”

Every method has a floor. The limit of detection (LOD) is the smallest amount from which the lab can say a substance is present with reasonable statistical certainty 5. The limit of quantification (LOQ) is the lowest amount it can actually measure with reasonable certainty 5.

So “<LOQ” or “below LOQ” means the metal was too low to put a reliable number on. It doesn’t mean zero. A useful report shows the LOQ value too, and that value should sit comfortably below the legal limit.

Measurement uncertainty

No measurement is perfectly exact. Under the EU rules for official food controls, results are reported as x ± U, where U is the expanded measurement uncertainty at a confidence level of about 95% 5. A result of “2.00 ± 0.30 mg/kg”, for example, means the true value very likely lies between 1.70 and 2.30. Under those rules, a food fails only if the result is above the maximum level beyond reasonable doubt once the uncertainty is taken into account 5.

Units: mg/kg, ppm and µg/g

Results for metals are usually given in mg/kg. One milligram per kilogram is the same as one part per million (ppm) and the same as one microgram per gram (µg/g). Three ways of writing one thing, so 1.26 mg/kg, 1.26 ppm and 1.26 µg/g are identical. Watch for µg/kg, which is a thousand times smaller.

Which heavy metals are tested, and what are the EU limits?

The standard panel is lead, cadmium, mercury and arsenic. EU law sets maximum levels for three of them in food supplements, in Commission Regulation (EU) 2023/915 6.

Metal EU maximum for food supplements Note
Lead 3.0 mg/kg Applies to all food supplements
Cadmium 1.0 mg/kg 3.0 mg/kg if at least 80% seaweed or dried shellfish
Mercury 0.10 mg/kg Applies to all food supplements
Arsenic No limit set Inorganic arsenic limits cover rice, baby foods and fruit juices

The European Food Safety Authority (EFSA) has assessed each of these metals. It concluded in 2010 that current dietary lead exposure poses a low to negligible risk for most adults, with possible concern for unborn babies, infants and children 7. It set a tolerable weekly intake for cadmium of 2.5 µg per kg of body weight and kept it after a reassessment in 2011 7. For mercury, it keeps separate weekly intakes for methylmercury and inorganic mercury 7.

Total arsenic or inorganic arsenic?

Arsenic comes in two broad families. Inorganic arsenic compounds contain no carbon-arsenic bonds and occur naturally in soil and groundwater 7. In 2024, EFSA confirmed that consumer exposure to inorganic arsenic in food raises a health concern, while some organic forms, such as arsenobetaine, are unlikely to 7.

On a standard metal panel, “arsenic” is often total arsenic, every form added together. Measuring inorganic arsenic on its own takes an extra separation step. If a report just says “arsenic”, check whether it means total or inorganic.

What has research found in shilajit?

Shilajit forms in rock, so it always carries some metals. A 2024 review counted around 65 metals reported in shilajit, including lead, arsenic, cadmium and mercury 8. In most published samples the toxic metals were below the limits set for herbal medicines, though a few studies found levels above them 8.

The spread is wide. A 2022 analysis of shilajit from India and Pakistan found lead, arsenic and mercury above standard limits 9. In the 2026 study of 12 samples from different regions, toxic metals were below established thresholds 3. That range is why a test of one specific batch tells you more than any general statement about shilajit.

What does a real shilajit lab report look like?

Here’s how the parts above look on an actual document: the report for Hilasti’s resin, which you can read in full on our lab results page.

  • Lab: Sekargas Hamilton in Klaipėda, Lithuania, an independent laboratory accredited under number AB 079.
  • Report number: 495158/23/VIL, with the date printed alongside.
  • Batch: 101.
  • Tested for: lead, arsenic, cadmium and mercury.
  • Results: lead 1.26 mg/kg, arsenic 0.56 mg/kg, cadmium 0.029 mg/kg and mercury 0.0047 mg/kg.

Set against the table above, lead is well under half the 3.0 mg/kg limit, and cadmium and mercury are a small fraction of theirs. Arsenic has no EU limit for food supplements, so the figure is simply there for you to see. The full PDF is on the page to download, and if you’d like the report for your own batch, just ask. It’s the kind of report we think every jar of shilajit should come with.

How do you turn mg/kg into an amount per serving?

A result in mg/kg describes the resin as a whole. What you take is a tiny piece of it. The conversion is one line:

Result in mg/kg × serving in grams = amount per serving in micrograms (µg).

A pea-sized serving of resin is about 100 mg, or 0.1 g. Here’s that worked through with the batch 101 figures.

Metal Result (mg/kg) Per 100 mg serving At the EU limit, per 100 mg
Lead 1.26 0.126 µg 0.3 µg
Arsenic 0.56 0.056 µg No EU limit
Cadmium 0.029 0.0029 µg 0.1 µg
Mercury 0.0047 0.00047 µg 0.01 µg

Two things are worth knowing. The EU limit is a concentration, so a product either meets it or doesn’t, whatever the serving size. And the per-serving figure is what lets you compare products fairly, since a capsule, a gummy and a piece of resin all hold different amounts.

Measuring a steady serving is easy with resin. Every Hilasti jar comes with a steel spatula, and half of its wide end is about one 100 mg serving. At that size, a 30 g jar holds around 300 servings. Our guide on how to take shilajit covers the rest of the daily ritual.

What other tests might you see on a shilajit report?

A heavy-metal panel is the core. Some sellers add more, and each extra test answers a different question.

Test What it measures What to check
Fulvic acid % The share of the resin that is fulvic acid The method named beside the figure
Microbes Yeasts, moulds and bacteria Counts per gram, and which organisms
Moisture How much water the sample holds Whether metals are “as received” or dry weight
Pesticides Residues from farming chemicals A named panel, not just “pass”
PAHs Compounds formed by burning and smoke Benzo(a)pyrene and the sum of four PAHs
Thallium and others Extra toxic metals Units and LOQ, as for the main four

Fulvic acid. This figure depends heavily on the method, because fulvic acid isn’t a single molecule. It’s defined by how it behaves: when an alkaline extract is acidified, humic acids settle out and the fraction that stays dissolved is called fulvic acid 10. Different methods draw that line differently. One validated method for humic products, for example, separates fulvic acid on a resin and weighs it on an ash-free basis, which earlier methods didn’t do 11. A 2026 shilajit study used a gravimetric method for total fulvic acid and chromatography for marker compounds 12. A fulvic percentage without its method can’t be compared with anyone else’s. Our guide to fulvic acid and minerals in shilajit explains what the figure describes.

Microbes. Resin straight from the mountain carries soil and plant matter. Raw, unprocessed shilajit has been found contaminated with moulds such as Aspergillus niger 13, which is why careful producers clean their resin and some reports include microbial counts.

Moisture. Raw resin holds some water, and the amount varies. A wetter sample gives a slightly lower mg/kg figure for the same metals, so a report should say whether results are “as received” or on a dry-weight basis.

PAHs and thallium. EU law sets limits for benzo(a)pyrene and four PAHs combined in certain food supplements, such as those containing botanicals 6. Thallium is rarely on standard panels. A 2025 study measured it in raw shilajit and commercial supplements, and found up to 0.226 µg/g in the raw resin and up to 0.5 µg/g in some supplements 14.

What are the red flags on a shilajit lab report?

A report can be genuine and still tell you very little. These are the signs that a document doesn’t do its job.

Red flag Why it matters
No batch number You can’t link the result to the jar you’re buying
No lab name or accreditation number You can’t check who tested it or what they’re accredited for
No date, or a date long before the batch on sale The test may not belong to this resin
A screenshot or cropped table only You can’t see the full document, its scope or its notes
Missing units A number without mg/kg or µg/g is meaningless
“Pass” or “compliant” with no figures You can’t see how close to the limit it was
An LOQ above the EU limit “Not detected” then proves nothing
Only fulvic acid, no metals It describes content, not contamination

For the warning signs that show up before you ever see a report, such as a missing origin or a suspiciously low price, see our real vs fake shilajit guide. Our article on shilajit side effects explains why contamination is the main thing to watch.

A quick checklist for any shilajit lab report

Keep this to hand the next time a seller sends you a PDF.

Check What good looks like
Who tested it An independent lab, named, with an accreditation number
What it covers Lead, cadmium, mercury and arsenic as a minimum
Which batch A batch number that matches your jar
When A report date that fits the batch on sale
How A named method for each test, such as ICP-MS
Units mg/kg, ppm or µg/g on every line
Limits Lead under 3.0, cadmium under 1.0, mercury under 0.10 mg/kg
Format The full PDF, not a picture of a table

If a seller can tick every line, you know what’s in the jar. There’s more on choosing resin in our FAQ and on where shilajit forms in what is shilajit.

Try resin you can check for yourself

If you’d like a jar that comes with its paperwork, our raw Himalayan shilajit resin is harvested in Nepal at around 4,800 m, with nothing added, and its heavy-metal report from an accredited laboratory is there for you to read line by line. The steel spatula is in the box, so all that’s left is a warm cup and a quiet minute. Both jar sizes are in our shop.

This article is for information only and isn’t medical advice. Speak to your doctor or pharmacist before taking a supplement, especially if you’re pregnant, breastfeeding, take medication or have a health condition.

Sources (14)
  1. Why leave your testing to chance? UKAS accreditation for testing laboratories. United Kingdom Accreditation Service (UKAS), 2022
  2. About ILAC. International Laboratory Accreditation Cooperation (ILAC), 2026
  3. Characterization of metal composition and molecular weight distribution in Shilajit. Journal of Trace Elements in Medicine and Biology, 2026
  4. Determination of mercury in ayurvedic dietary supplements that are not rasa shastra using the hydra-C direct mercury analyzer. International Journal of Analytical Chemistry, 2013
  5. Commission Regulation (EC) No 333/2007 laying down the methods of sampling and analysis for the official control of the levels of lead, cadmium, mercury, inorganic tin, 3-MCPD and benzo(a)pyrene in foodstuffs. European Commission, 2007
  6. Commission Regulation (EU) 2023/915 on maximum levels for certain contaminants in food and repealing Regulation (EC) No 1881/2006. European Commission, 2023
  7. Metals as contaminants in food. European Food Safety Authority (EFSA), 2026
  8. Hazardous or Advantageous: Uncovering the Roles of Heavy Metals and Humic Substances in Shilajit (Phyto-mineral) with Emphasis on Heavy Metals Toxicity and Their Detoxification Mechanisms. Biological Trace Element Research, 2024
  9. Rapid Determination and Quantification of Nutritional and Poisonous Metals in Vastly Consumed Ayurvedic Herbal Medicine (Rejuvenator Shilajit) by Humans Using Three Advanced Analytical Techniques. Biological Trace Element Research, 2022
  10. Biomedical Applications of Humic Substances: From Natural Biopolymers to Therapeutic Agents. Antioxidants, 2025
  11. A new standardized method for quantification of humic and fulvic acids in humic ores and commercial products. Journal of AOAC International, 2014
  12. Shilajit-analytical study to understand the phyto complex present in shilajit raw material, extract and resin by using hyphenated techniques. Journal of Chromatography A, 2026
  13. Shilajit: A panacea for high-altitude problems. International Journal of Ayurveda Research, 2010
  14. Quantifying of thallium in Shilajit and its supplements to unveil the potential risk of consumption of this popular traditional medicine. BMC Chemistry, 2025

Questions people ask

Does shilajit contain heavy metals?

All shilajit contains some metals, because it forms in mountain rock. What matters is how much, which is why a test of the batch you're buying is worth more than any general promise on a label.

Is ppm the same as mg/kg?

Yes. One part per million is one milligram per kilogram, which is also one microgram per gram. A report may use any of the three, and the numbers stay the same.

What does <LOQ mean on a lab report?

It means the metal was below the lowest amount the lab's method can measure reliably. It isn't the same as zero, so check that the LOQ itself sits well below the EU limit.

What is the EU limit for lead in shilajit?

Shilajit sold as a food supplement in the EU falls under the general limit for food supplements, which is 3.0 mg of lead per kilogram.

How often should shilajit be tested?

Ideally every batch, because natural resin varies from one harvest to the next. A good seller can tell you which report matches the batch number on your jar.

Your cart

Your cart is empty.